Programming The Platform Flash Prom - Xilinx Spartan-3E User Manual

R
To generate the actual PROM file, click Operations
Figure
Figure 4-20: Click Operations
The iMPACT software indicates that the PROM file was successfully created, as shown in
Figure

Programming the Platform Flash PROM

To program the formatted PROM file into the Platform Flash PROM via the on-board USB-
JTAG circuitry, follow the steps outlined in this subsection.
Place the iMPACT software in the JTAG Boundary Scan mode, either by choosing
Boundary Scan in the iMPACT Modes pane, as shown in
the Boundary Scan tab.
Spartan-3E Starter Kit Board User Guide
UG230 (v1.0) March 9, 2006
Programming the FPGA, CPLD, or Platform Flash PROM via USB
4-20.
4-21.
Figure 4-21: PROM File Formatter Succeeded
www.xilinx.com
Generate File as shown in
Generate File to Create the Formatted PROM File
Figure
UG230_c4_21_022706
UG230_c4_22_022706
4-22, or by clicking on
37