Table of Contents
Advertisement
Chapter 5: Character LCD Screen
This bit either auto-increments or auto-decrements the DD RAM and CG RAM address
counter by one location after each
CG RAM or DD RAM
Bit DB0: (S) Shift
Display On/Off
Display is turned on or off, controlling all characters, cursor and cursor position character
(underscore) blink.
Execution Time: 40 μs
Bit DB2: (D) Display On/Off
Bit DB1: (C) Cursor On/Off
The cursor uses the five dots on the bottom line of the character. The cursor appears as a
line under the displayed character.
Bit DB0: (B) Cursor Blink On/Off
Cursor and Display Shift
Moves the cursor and shifts the display without changing DD RAM contents. Shift cursor
position or display to the right or left without writing or reading display data.
This function positions the cursor in order to modify an individual character, or to scroll
the display window left or right to reveal additional data stored in the DD RAM, beyond
the 16th character on a line. The cursor automatically moves to the second line when it
shifts beyond the 40th character location of the first line. The first and second line displays
shift at the same time.
When the displayed data is shifted repeatedly, both lines move horizontally. The second
display line does not shift into the first display line.
Execution Time: 40 μs
48
command. The cursor or blink position moves accordingly.
0
Shifting disabled
1
During a DD RAM write operation, shift the entire display value in the direction
controlled by Bit DB1 (I/D). Appears as though the cursor position remains constant
and the display moves.
0
No characters displayed. However, data stored in DD RAM is retained
1
Display characters stored in DD RAM
0
No cursor
1
Display cursor
0
No cursor blinking
1
Cursor blinks on and off approximately every half second
www.xilinx.com
Write Data to CG RAM or DD RAM
Spartan-3E Starter Kit Board User Guide
R
or
Read Data from
UG230 (v1.0) March 9, 2006
Advertisement
Table of Contents
