Xilinx Spartan-3E User Manual page 95

R
To generate the actual PROM file, click Operations
Figure
Figure 12-13: Click Operations
As shown in
successfully created. The PROM Formatter creates an output file based on the settings
shown in
Spartan-3E Starter Kit Board User Guide
UG230 (v1.0) March 9, 2006
Figure 12-12: PROM Formatting Completed
12-13.
Figure 12-14, the iMPACT software indicates that the PROM file was
Figure 12-8. In this example, the output file is called MySPIFlash.mcs.
Figure 12-14: PROM File Formatter Succeeded
www.xilinx.com
Configuring from SPI Flash
UG230_c15_11_030206
Generate File as shown in
Generate File to Create the Formatted PROM File
UG230_c15_12_030206
UG230_c15_13_030206
95