Ml501 Demonstrations In Platform Flash; Platform Flash Lcd Demonstration - Xilinx ML501 Getting Started Tutorial

ML501 Demonstrations in Platform Flash

ML501 Demonstrations in Platform Flash
The Platform Flash PROM contains advanced features, such as revision control, and is a
convenient and easy-to-use method of configuring FPGAs.
The Platform Flash on the ML501 board can hold multiple bitstreams:
•
•
•
To select configuration using Platform Flash, set the configuration address and mode DIP
switch (8-position DIP switch) to 00011001.

Platform Flash LCD Demonstration

Location
Platform Flash configuration address 0.
Description
This demonstration displays to the character LCD the message "Put Your Design Here".
Setup
1.
2.
Platform Flash XROM Demonstration
Location
Platform Flash configuration address 1.
Description
The XROM program presents a menu over the serial port offering various diagnostic tests
of the ML501 board features.
Setup
1.
2.
3.
www.BDTIC.com/XILINX
24
"Platform Flash LCD Demonstration"
"Platform Flash XROM Demonstration"
"My Own Platform Flash Image Demonstration"
Set the configuration address DIP switches to the binary value 00011001.
Press the Prog button to see the message "Put Your Design Here" displayed on the
character LCD.
Set the configuration address DIP switches to the binary value 00111001.
Press the Prog button to run this demonstration.
Select from the menu presented on the serial terminal to run various diagnostic tests.
www.xilinx.com ML501 Getting Started Tutorial
UG228 (v1.0) August 30, 2006
R