Xilinx Spartan-3E User Manual page 40

Chapter 4: FPGA Configuration Options
The iMPACT software indicates if programming was successful or not. If programming
was successful and the Load FPGA option was left unchecked, push the PROG_B push-
button switch shown in
newly programmed Platform Flash PROM. If the FPGA successfully configures, the DONE
LED, also shown in
40
Figure 4-26: PROM Programming Options
Figure 4-2, page 26 to force the FPGA to reconfigure from the
Figure 4-2, lights up.
www.xilinx.com
UG230_c4_27_022806
Spartan-3E Starter Kit Board User Guide
UG230 (v1.0) March 9, 2006
R