Xilinx Spartan-3E User Manual page 35

R
The Spartan-3E Starter Kit board has an XCF04S Platform Flash PROM. Select xcf04s
from the drop list, as shown in
The PROM Formatter then echoes the settings, as shown in
The PROM Formatter then prompts for the name(s) of the FPGA configuration bitstream
file. As shown in
(*.bit). Choose No after selecting the last FPGA file. Finally, click OK to continue.
Spartan-3E Starter Kit Board User Guide
UG230 (v1.0) March 9, 2006
Programming the FPGA, CPLD, or Platform Flash PROM via USB
Figure
Figure 4-16: Choose the XCF04S Platform Flash PROM
Figure 4-17: Click Finish after Entering PROM Formatter Settings
Figure 4-18, click OK to start selecting files. Select an FPGA bitstream file
www.xilinx.com
4-16. Click Add, then click Next >.
Figure
UG230_c4_17_022706
4-17. Click Finish.
UG230_c4_18_022706
35