Table of Contents
Advertisement
Chapter 12: SPI Serial Flash
The PROM Formatter then echoes the settings, as shown in
The PROM Formatter then prompts for the name(s) of the FPGA configuration bitstream
file. As shown in
(*.bit). Choose No after selecting the last FPGA file. Finally, click OK to continue.
When PROM formatting is complete, the iMPACT software presents the present settings
by showing the PROM, the select FPGA bitstream(s), and the amount of PROM space
consumed by the bitstream.
bitstream stored in an XCF04S Platform Flash PROM.
94
Figure 12-10: Click Finish after Entering PROM Formatter Settings
Figure
12-11, click OK to start selecting files. Select an FPGA bitstream file
Figure 12-11: Enter FPGA Configuration Bitstream File(s)
Figure 12-12
www.xilinx.com
Figure
12-10. Click Finish.
UG230_c15_10_030206
shows an example for a single XC3S500E FPGA
Spartan-3E Starter Kit Board User Guide
UG230 (v1.0) March 9, 2006
R
UG230_c15_09_030206
Advertisement
Table of Contents
