Ml50X Demonstrations In Platform Flash; Platform Flash Lcd Demonstration; Location; Description - Xilinx ML505 Getting Started Tutorial

ML50x Demonstrations in Platform Flash

ML50x Demonstrations in Platform Flash
The Platform Flash PROM contains advanced features, such as revision control, and is a
convenient and easy-to-use method of configuring FPGAs.
The Platform Flash on the ML50x board can hold multiple bitstreams:
•
•
•
To select configuration using Platform Flash, set the configuration address and mode DIP
switch (8-position DIP switch) to 00011001.

Platform Flash LCD Demonstration

Location

ML505/ML506: Platform Flash configuration address 0.
ML507: Platform Flash configuration address 1.

Description

This demonstration displays to the character LCD the message "Put Your Design Here".

Setup

1.
2.

Platform Flash XROM Demonstration

Location
ML505/ML506: Platform Flash configuration address 1.
ML507: Platform Flash configuration address 0.
Description
The XROM program presents a menu over the serial port offering various diagnostic tests
of the ML50x board features.
Setup
1.
2.
www.BDTIC.com/XILINX
28
"Platform Flash LCD Demonstration"
"Platform Flash XROM Demonstration"
"My Own Platform Flash Image Demonstration"
Set the configuration address DIP switches to the following binary value:
For ML505/ML506: 00011001
For ML507: 00111001
Press the Prog button to see the message "Put Your Design Here" displayed on the
character LCD.
Set the configuration address DIP switches to the following binary value:
For ML505/ML506: 00111001
For ML507: 00011001
Press the Prog button to run this demonstration.
www.xilinx.com ML505/ML506/ML507 Getting Started Tutorial
UG348 (v3.0.2) October 9, 2008
R