Dismantling The Guard - Technogym FORMA LINE BIKE FORMA DDC5 Series Technical Assistance Manual

7.7. DISMANTLING THE GUARD

Figure 7.7-1
Figure 7.7-2
Figure 7.7-3
Page 7.10
Forma Line BIKE FORMA (DDC5): Technical Assistance manual - rev. 1.1
1. Unscrew the screw (a) using a 4mm Allen
wrench.
2. Remove the top guard (b) and fix it with a
strap, as shown in the figure at the side.
3. Unscrew the 2 screws (c) using a 4mm Allen
wrench.
4. Gently press downwards on the top part of
the right-hand guard in order to unhook it
from the left-hand one, as shown in the
figure.
Continues on the next page...