Standard Settings; Low Kit Menu - Technogym FORMA LINE BIKE FORMA DDC5 Series Technical Assistance Manual

Forma Line BIKE FORMA (DDC5): Technical Assistance manual - rev. 1.1
9.2.4. S
TANDARD SETTINGS
This function allows you to reset the equipment operating data and at the same time to set the
default values of the Brake Board parameters. In order to access this menu, when the display shows:
if you press ENTER, the following message will be displayed:
By pressing ENTER again, all the default values will be re-instated. To return to the upper level
press CANCEL for a few seconds.
9.2.5. L
OW KIT MENU
This function allows you to directly access Firmware (FW) of the Brake Board. In order to access
this menu, when the display shows:
press ENTER. This function is structured as follows:

STANDARD SETTINGS ?

CONFIRM ?

LOW KIT MENU

Page 9.15