Forma Line BIKE FORMA (DDC5): Technical Assistance manual - rev. 1.1
9.2.3.
E
L
RRORS
This function allows you to access the log of errors generated by the equipment. In order to access
this menu, when the display shows:
press ENTER. This function is structured in the following way:
Inside this function, in addition to the errors recorded by the equipment, we also find 3 sub-
functions, as described below:
9.2.3.1.
Read from low kit
To recall the errors memorized by the low kit and to be able to visualize them on the display, move
using the +/- keys of the difficulty level until the display shows:
press ENTER to load the parameters found in the low kit. Return to the upper level by pressing
CANCEL for a few seconds.
9.2.3.2.
Reset errors
To reset the errors log on the high kit and on the low kit, move using the +/- keys of the difficulty
level until the display shows:
press ENTER to reset the errors log. Return to the upper level by pressing CANCEL for a few
seconds.
OG
ERRORS LOG
ERRORS LOG
READ FROM LOW KIT ?
RESET ERRORS ?
READ FROM
LOW KIT ?
Error 1
.......................
Error 10
RESET ERRORS ?
COM.Fault
Page 9.13