Forma Line BIKE FORMA (DDC5): Technical Assistance manual - rev. 1.1
7. DISMANTLING THE PARTS
7.1. IMPORTANT NOTE ON DISMANTLING
DANGER: DO NOT under any circumstances unscrew the screws and nuts
highlighted in the figure. During the initial assembling during production of the (X)
and (Y) components, the highlighted screws and nuts are tightened, buckling the
frame on the fusion component, making them integral with each other. These will
together constitute a single frame for the equipment.
Figure 7.1-1
Figure 7.1-2
Page 7.1