Setting The Parameters To Default Values; Formatting The P&P Key - Technogym FORMA LINE BIKE FORMA DDC5 Series Technical Assistance Manual

9.1.10. S
ETTING THE PARAMETERS TO DEFAULT VALUES
It is possible to set the default values of the user menu. In order to select the function, when the
display shows:
Press ENTER to confirm the choice, + or - of the difficulty level to move onto the subsequent or
previous parameter. If ENTER has been pressed, the display shows:
confirm with ENTER or cancel by pressing CANCEL for a few seconds.
9.1.11. F
ORMATTING THE
This function allows the formatting of a TGS key for the Plug-&-Play mode. In order to select the
function, when the display shows:
confirm with ENTER or cancel by pressing CANCEL for a few seconds.
At the end of the configuration procedure press the CANCEL key for a few seconds to quit.
The CANCEL key can be pressed at any time to interrupt the procedure and return to Stand-By.
9.1.12. SN
This parameter allows the equipment serial number to be displayed.
Press + or - of the difficulty level to move onto the subsequent parameter or the previous one.
Page 9.6
Forma Line BIKE FORMA (DDC5): Technical Assistance manual - rev. 1.1
DEFAULT CONFIG.
CONFIRM?
P&P
KEY
FORMATTING P&P
SN:xxxx