Dismantling The Platforms - Technogym FORMA LINE BIKE FORMA DDC5 Series Technical Assistance Manual

7.14. DISMANTLING THE PLATFORMS

Figure 7.14-1
Figure 7.14-2
Page 7.32
Forma Line BIKE FORMA (DDC5): Technical Assistance manual - rev. 1.1
Front Platform:
1. Unscrew the 4 screws (a) using a medium-
sized Phillips screwdriver.
2. Remove the front platform (b).
Rear Platform:
3. Unscrew the 6 screws (c) using a medium-
sized Phillips screwdriver.
4. Remove the rear platform (d).
carry out the above operations in reverse.
In order to re-fit the Platforms,