Dismantling The Internal Bushing - Technogym FORMA LINE BIKE FORMA DDC5 Series Technical Assistance Manual

7.9.2.
1. Lightly force the bushing lever (c) downward and rotate as indicated by the yellow arrow to
remove it from its housing.
To re-fit the seat group, follow the above operations in reverse, considering the following NOTES:
Figure 7.9-5
Page 7.16
Forma Line BIKE FORMA (DDC5): Technical Assistance manual - rev. 1.1
D
ISMANTLING THE INTERNAL BUSHING
Figure 7.9-4
1. When insert the seat tub, keep pressed the
seat adjusting system.
2. Place the seat group just above the teethed
guide, as indicated by the yellow arrow.
3. Insert the seat group and carefully slide it
down.