General Regulations Regarding Service Work - Technogym FORMA LINE BIKE FORMA DDC5 Series Technical Assistance Manual

1.3. GENERAL REGULATIONS REGARDING SERVICE WORK

1. Always mark components or positions which might easily be confused with each other during
re-assembly.
2. Use original Technogym spare parts and recommended brand lubricants.
3. Use special tools when specified to do so.
4. Consult the Technical Newsletters as they might contain more up-to-date details on regulation
and servicing procedures compared to those in this manual.
5. Before undertaking any work, check that the recommended tools are available and that they are
in good condition.
6. With regard to the procedures given in this manual, only use the tools that have been indicated.
Tool measurements in this manual are expressed in mm.
Page 1.2
Forma Line BIKE FORMA (DDC5): Technical Assistance manual - rev. 1.1