Cooldown Time: Xxx; Enabling The Tgs - Technogym FORMA LINE BIKE FORMA DDC5 Series Technical Assistance Manual

9.1.5.
It is possible to set the Time of the Cooldown at the end of every exercise in seconds, with values
ranging from 5 to 180. In order to change the setting, when the display shows:
To change the parameter you need to press the ENTER key: the current value of the parameter will
be displayed in flashing mode and it is necessary to press CANCEL to cancel the current value and
use the numerical keys to enter the desired value.
The default value of this parameter is 60.
When training with the TGS key, the cool-down is interrupted when you pull out the key.
9.1.6.
If the TGS key is not present, the configuration of the following parameter does not
affect at all the machine.
It is possible to disable the use of the function keys so as to allow the equipment to be used only
with the TGS. In order to change the setting, when the display shows the current setting:
press the +/- GOAL keys to choose the desired setting from among the options shown in the
following table:
Page 9.4
Forma Line BIKE FORMA (DDC5): Technical Assistance manual - rev. 1.1
C
OOLDOWN TIME

COOLDOWN TIME: xxx

E TGS
NABLING THE
KEYS : xxx
K
EYS
ENABLED
DISABLED
<default>