9.2.2.2.
Write to low kit
To memorize on the low kit the values of the parameters currently on display, move using the +/-
keys of the difficulty level until the display shows:
press ENTER to transfer the new data to the low kit. Return to the upper level by pressing
CANCEL for a few seconds.
9.2.2.3.
Operating data
The equipment operating data as displayed is updated every 10 minutes. This means that every time
the equipment is switched off, the data which has been modified since the last saving to memory is
lost.
Display Message
Life Brake:
Life Kit High:
Life Low Kit:
KJ:
Tot Km:
By selecting one of the items in the table above, it is possible to modify its content, but only by
resetting its value. When you press ENTER the "Reset life..." message appears with the name of
the selected item. If you press ENTER again, the value of the selected piece of information is reset,
whereas if you press CANCEL you return to the previous value for the information.
Page 9.12
Forma Line BIKE FORMA (DDC5): Technical Assistance manual - rev. 1.1
WRITE TO LOW KIT ?
Description
Minutes x 10 of Brake operation
(measured by the Low Kit)
Minutes x 10 of High Kit operation
(measured by the High Kit)
Minutes x 10 of Low Kit operation
(measured by the Low Kit)
total KJ spent
(relating to all the exercises performed)
(measured by the High Kit)
total Km travelled
(relating to all the exercises performed)
(measured by the Low Kit)