Language: Xxx; Units Of Measurement; Maximum Exercise Time; Pause Time: Xxx - Technogym FORMA LINE BIKE FORMA DDC5 Series Technical Assistance Manual

Forma Line BIKE FORMA (DDC5): Technical Assistance manual - rev. 1.1
9.1.1.
When a language has been chosen from the list of available languages, all the messages on the
equipment's display are shown in the selected language. In order to change the setting, when the
display shows the current setting:
Press the +/- GOAL keys to choose the desired language from among the available options.
9.1.2.
It is possible to choose the EUROPEAN system (Kg and Km) or the AMERICAN system (pounds
and miles). In order to change the setting, when the display shows the current setting:
Press the +/- GOAL keys to choose the required unit of measurement from among the options in the
following table:
9.1.3.
It is possible to set the maximum time of every exercise in minutes, with values ranging from 1 to
9999.
In order to change the setting, when the display shows the current maximum time:
To change the parameter you need to press the ENTER key: the current value of the parameter will
be displayed in flashing mode and it is necessary to press CANCEL to cancel the current value and
use the numerical keys to enter the desired value.
The default value of this parameter is 9999.
9.1.4.
It is possible to set the maximum time of the pause of every exercise in seconds, with values ranging
from 10 to 999. In order to change the setting, when the display shows the current maximum time:
To change the parameter you need to press the ENTER key: the current value of the parameter will
be displayed in flashing mode and it is necessary to press CANCEL to cancel the current value and
use the numerical keys to enter the desired value.
The default value of this parameter is 60.
L
ANGUAGE

LANGUAGE: xxx

U
NITS OF MEASUREMENT
MEASURES: xxx
M
EASURE
KM
MILES
M
AXIMUM EXERCISE TIME
MAX TIME: xxx
P
AUSE TIME

PAUSE TIME: xxx

<default>
Page 9.3