Dismantling The Handle Support Plate - Technogym FORMA LINE BIKE FORMA DDC5 Series Technical Assistance Manual

Forma Line BIKE FORMA (DDC5): Technical Assistance manual - rev. 1.1
7.9.3.4.

Dismantling the handle support plate

Figura 7.9-14
Carry out the operations in the paragraph:7.9.3.3"Dismantling the spring and the handle".
1. Unscrew the 4 screws (a) using a 7mm socket wrench.
2. Unscrew the screw (b) using a 13mm socket wrench.
3. Remove the support plate.
To re-fit the all what removed,
follow the above operations in reverse.
Page 7.23