The Resistance Is Not Correct - Technogym FORMA LINE BIKE FORMA DDC5 Series Technical Assistance Manual

6.6. THE RESISTANCE IS NOT CORRECT

The equipment produces an incorrect resistance if:
1. the mechanics are not perfect;
2. the speed as measured is not correct;
3. the Brake Board is faulty;
4. the Brake Board was not programmed correctly with the sequence of:
a. Firmware (FW),
b. Brake Table;
c. Standard Settings.
5. the Electromagnetic Brake is faulty.
Replace the Brake
winding
Page 6.14
Forma Line BIKE FORMA (DDC5): Technical Assistance manual - rev. 1.1
HE RESISTANCE IS
INCORRECT
Install the latest v ersion of
Firmware (FW), Brake Table
and carry out the Standard
Setting.
Are the mechanics of the
machine in good condition?
Carry out the "Speed
signal is Incorrect"
troubleshooting procedure
YES
Does the Brake Board output
the correct current to the brake
winding?
1
2
NO
YES
3
NO
Repair the f aulty
mechanical parts
Replace the
Brake Board