Forma Line BIKE FORMA (DDC5): Technical Assistance manual - rev. 1.1
11. APPENDIX
11.1. TOOLS TO BE USED
The following tools are required to carry out all the fitting, adjustment and maintenance tasks on the
equipment:
• Small Phillips screwdriver;
• Medium-sized Phillips screwdriver;
• Large Phillips screwdriver;
• 7mm wrench;
• 10mm wrench;
• 13mm wrench;
• 17mm wrench;
• 19mm wrench;
• 3mm Allen wrench;
• 4mm Allen wrench;
• 5mm Allen wrench;
• 6mm Allen wrench;
• 8mm Allen wrench;
• Torque wrench;
• Snap ring pincers;
Using the code R0003677AA, you can order a full set of Allen wrenches with the
following sizes: 2, 2.5, 3, 4, 5, 6 and 8mm.
Page 11.1