Technogym FORMA LINE BIKE FORMA DDC5 Series Technical Assistance Manual page 69

Forma Line BIKE FORMA (DDC5): Technical Assistance manual - rev. 1.1
Figure 7.7-4
Figure 7.7-5
Figure 7.7-6
On the right-hand side:
5. Unscrew the 6 screws (d) using a 4mm Allen
wrench.
6. Line up the pedal in line with the saddle
support, as indicated by the yellow arrow.
7. Remove the right-hand guard.
On the left-hand side:
After removing the right-hand guard,
all you need do for the left-hand side
is unscrew the corresponding screws
as highlighted in the figure at the
side.
8. Protect the pedal as far as its base using a
cloth, as indicated in the figure at the side.
Continues on the next page...
Page 7.11