Dismantling The Seat - Technogym FORMA LINE BIKE FORMA DDC5 Series Technical Assistance Manual

Forma Line BIKE FORMA (DDC5): Technical Assistance manual - rev. 1.1

7.9. DISMANTLING THE SEAT

7.9.1.
Figure 7.9-1
2. Give a gentle knock to the bush of the end-of-run (b), raising the seat above its maximum
height, so as to facilitate its removal from the frame.
3. Lift the bush (b) by exerting leverage under the housing of the screws, if necessary.
Figure 7.9-3
D
ISMANTLING THE SEAT SUPPORT
Figure 7.9-2
1. Unscrew the 2 screws (a) using a 4mm Allen
wrench and slide off the bush.
4. Continue to press on the seat adjustment
system under the saddle and slide off the Seat
Unit.
Continues on the next page...
Page 7.15