Dismantling The Handlebars - Technogym FORMA LINE BIKE FORMA DDC5 Series Technical Assistance Manual

7.5. DISMANTLING THE HANDLEBARS

Figure 7.5-1
Figure 7.5-2
Page 7.8
Forma Line BIKE FORMA (DDC5): Technical Assistance manual - rev. 1.1
1. Unscrew the 3 screws (a) using a medium-
sized Phillips screwdriver.
2. Remove the bottom guard (b).
3. Unscrew the 4 screws (c) using a 5mm Allen
wrench.
4. Remove the handlebars.
DANGER: Support the handlebars
before unscrewing the last screw.
WARNING: During
tighten the screws (c) using a torque
wrench set at 16Nm.
re-assembly,