Dismantling The Control Panel - Technogym FORMA LINE BIKE FORMA DDC5 Series Technical Assistance Manual

7.2.

DISMANTLING THE CONTROL PANEL

Figure 7.2-1
Figure 7.2-2
Figure 7.2-3
Page 7.2
Forma Line BIKE FORMA (DDC5): Technical Assistance manual - rev. 1.1
Switch off the equipment and remove the power
supply plug from the wall socket.
1. Unscrew the 4 screws (a) using a medium-
sized Phillips screwdriver.
2. Remove the keyboard (b) as indicated by the
yellow arrows.
3. Disconnect the flat cable highlighted in the
figure.
4. Unscrew the 4 screws (c), using a medium
Phillips screwdriver, remove the Display (d).
Continues on the next page...