Technogym FORMA LINE BIKE FORMA DDC5 Series Technical Assistance Manual page 61

Forma Line BIKE FORMA (DDC5): Technical Assistance manual - rev. 1.1
Figure 7.2-4
Figure 7.2-5
5. Disconnect the connectors highlighted in the
figure at the side and remove the Display
assembly (e).
6. Unscrew the 2 screws (f), using a 17mm
wrench to remove the rear protection (g) of
the display.
WARNING:
tighten the pedal lever using a torque
wrench set at 40Nm
To re-fit the display, follow the above operations
in reverse.
During re-assembly,
Page 7.3