Boot Version; Key Reader Version - Technogym FORMA LINE BIKE FORMA DDC5 Series Technical Assistance Manual

Forma Line BIKE FORMA (DDC5): Technical Assistance manual - rev. 1.1
9.2.7. BOOT
VERSION
This function allows you to display the BOOT version. In order to display it, when the display
shows:
press ENTER and a message will be displayed which identifies the BOOT version.
The Boot Version parameter refers to the "boot" version relating to the display
hardware. The boot is a part of the software which allows you to load the TG
application onto the display board. The parameter is used solely as info. It is NOT
possible to change the version or update it.
9.2.8. K R
EY EADER
If the TGS key is not present, the configuration of the following parameter does not
affect at all the machine.
This function allows you to display the Key Reader Version.
In order to display it, when the display shows:
press ENTER and a message will be displayed which identifies the version of the KEY READER.

BOOT VERSION

V
ERSION

KEY READER VERSION

Page 9.17