First Start-Up - Technogym FORMA LINE BIKE FORMA DDC5 Series Technical Assistance Manual

Forma Line BIKE FORMA (DDC5): Technical Assistance manual - rev. 1.1

5.3. FIRST START-UP

After completing the installation procedure the equipment is ready for use.
On POWERED models, all you need to do to start the equipment is turn the start switch from
position 0 to position 1.
When it starts up, the equipment performs a Check-Up between the High Kit and Low Kit. At the
end, the equipment goes into Stand-By position while waiting for a command from the keyboard.
In order to check that the equipment functions correctly:
• Get on the equipment and start an exercise;
• Check that the speed indicator varies;
• Check that the hardness of the exercise and the level of difficulty varies from 1 to 25, when
you press the difficulty level"+" and "
• Put on the cardio transmitter and check that the equipment reads your heart beat rate
correctly.
− " buttons on the keyboard;
Page 5.3