Logic For Group Alarm Almcalh; Identification; Application - ABB REB670 Applications Manual

Section 13
Logic
13.2
13.2.1
13.2.2
13.2.3
13.3
13.3.1
13.3.1.1
13.3.1.2
384

Logic for group alarm ALMCALH

Identification

Function description
Logic for group alarm

Application

Group alarm logic function ALMCALH is used to route alarm signals to different LEDs
and/or output contacts on the IED.
ALMCALH output signal and the physical outputs allows the user to adapt the alarm
signal to physical tripping outputs according to the specific application needs.
Setting guidelines
Operation: Enabled or Disabled
Logic for group alarm WRNCALH
Logic for group warning WRNCALH
Identification
Function description
Logic for group warning
Application
Group warning logic function WRNCALH is used to route warning signals to LEDs and/
or output contacts on the IED.
WRNCALH output signal WARNING and the physical outputs allows the user to adapt
the warning signal to physical tripping outputs according to the specific application needs.
IEC 61850 IEC 60617
identification identification
ALMCALH -
IEC 61850 IEC 60617
identification identification
WRNCALH -
1MRK 505 337-UUS -
ANSI/IEEE C37.2
device number
-
ANSI/IEEE C37.2
device number
-
Application manual