Section 15
Logic
15.3
15.3.1
15.3.2
15.3.3
15.4
15.4.1
15.4.1.1
15.4.1.2
234
Logic for group alarm ALMCALH
Identification
Function description
Logic for group alarm
Application
Group alarm logic function ALMCALH is used to route alarm signals to different
LEDs and/or output contacts on the IED.
ALMCALH output signal and the physical outputs allows the user to adapt the
alarm signal to physical tripping outputs according to the specific application
needs.
Setting guidelines
Operation: On or Off
Logic for group alarm WRNCALH
Identification
Function description
Logic for group warning
Application
Group warning logic function WRNCALH is used to route warning signals to
LEDs and/or output contacts on the IED.
WRNCALH output signal WARNING and the physical outputs allows the user to
adapt the warning signal to physical tripping outputs according to the specific
application needs.
Setting guidelines
OperationOn or Off
IEC 61850
IEC 60617
identification
identification
ALMCALH
-
IEC 61850
IEC 60617
identification
identification
WRNCALH
-
Phasor measurement unit RES670 2.2 IEC
1MRK 511 407-UEN C
GUID-64EA392C-950F-486C-8D96-6E7736B592BF v1
GUID-64EA392C-950F-486C-8D96-6E7736B592BF v1
ANSI/IEEE C37.2
device number
-
GUID-70B268A9-B248-422D-9896-89FECFF80B75 v1
GUID-0BDD898A-360B-4443-A5CF-7619C80A17F4 v2
GUID-3EBD3D5B-F506-4557-88D7-DFC0BD21C690 v4
ANSI/IEEE C37.2
device number
-
GUID-FC0DBB7B-FF86-44BF-83D6-DDF120A176DE v1
GUID-B08F2636-33DA-4937-92EB-1A8AC0909AB4 v2
Application manual