Setting Guidelines - ABB REB670 Applications Manual

1MRK 505 337-UUS -
13.3.1.3
13.4
13.4.1
13.4.1.1
13.4.1.2
13.4.1.3
13.5
Application manual

Setting guidelines

OperationEnabled or Disabled
Logic for group indication INDCALH
Logic for group indication INDCALH
Identification
Function description
Logic for group indication
Application
Group indication logic function INDCALH is used to route indication signals to different
LEDs and/or output contacts on the IED.
INDCALH output signal IND and the physical outputs allows the user to adapt the
indication signal to physical outputs according to the specific application needs.
Setting guidelines
Operation: Enabled or Disabled
Configurable logic blocks
The configurable logic blocks are available in two categories:
• Configurable logic blocks that do not propagate the time stamp and the quality of
signals. They do not have the suffix QT at the end of their function block name, for
example, SRMEMORY. These logic blocks are also available as part of an extension
logic package with the same number of instances.
• Configurable logic blocks that propagate the time stamp and the quality of signals.
They have the suffix QT at the end of their function block name, for example,
SRMEMORYQT.
IEC 61850 IEC 60617
identification identification
INDCALH -
Section 13
Logic
ANSI/IEEE C37.2
device number
-
385