1 2 3 4 5 6 7 8
Figure 2-13 Remote I/O TTL Outputs
To set the limits:
1 Press
2 To change either of these settings, press the appropriate softkey. The
3 To confirm your choice, press the appropriate measurement units.
Limits can be disabled and re- enabled simply by pressing
E4418B Power Meter User's Guide
,
Limits
minimum limits are displayed under the
respectively.
power meter displays the current value in a pop- up window. Modify
this value (see below) until the desired value is displayed.
• Use
or
currently positioned.
• Use
or
Pin Number
Connection
1
none
2
Ground
3
Upper Window TTL Output
4
Lower Window TTL Output
5
TTL Input 1
6
TTL Input 2
7
Ground
8
Ground
. The current setting of the maximum and
to modify the digit on which the cursor is
to move to other digits.
Power Meter Operation
and
softkeys
Max
Min
Limits Off On
2
.
73