Evinrude E-TEC E40DRLSCB Service Manual page 49

M T M
ANUAL ILT ODELS
Manual tilt models require Transom Mounting Kit,
P/N 394219. The kit includes a transom mounting
plate and hardware for fastening outboard to tran-
som.
1
1. Transom mounting plate
The kit also includes clamp pads, P/N 315774,
which must be used to secure mounting bolts in
slots at the bottom of the outboard stern brackets.
1
1. Clamp pad
INSTALLATION AND PREDELIVERY
Install the mounting bolts through the stern brack-
ets and transom. Install round backing plates and
locknuts onto bolts and tighten securely.
1
1. Round backing plates
2. Locknuts
18961
COB2505
OUTBOARD INSTALLATION
2
2
DR26499
47