Evinrude E-TEC E40DRLSCB Service Manual page 149

Apply Locquic Primer and Screw Lock to the
threaded portion, and install the two thru-bolts.
Tighten bolts to a torque of 100 to 110 in. lbs. (11
to 12.5 N·m).
Lubricate the splines (helix) of starter pinion shaft
with Starter Bendix Lube. DO NOT use liquid or
aerosol spray lubricants.
ELECTRIC STARTER SERVICING
Install pinion, spacer and spring.
Install spacer and retaining clip. Spacer must be
raised to cover clip completely.
002306
To test the assembly and operation of the starter,
refer to No Load Current Draw Test on p. 132.
002307
ELECTRICAL AND IGNITION
002305
7
002297
002311
147