Recoil Starter Installation - Evinrude E-TEC E40DRLSCB Service Manual

Table of Contents

RECOIL STARTER

INSTALLATION

Apply Nut Lock to the threads of starter ratchet

screws. Install washers and ratchet on flywheel.

Tighten screws to a torque of 120 to 144 in. lbs.

(13.5 to 16 N·m).

RECOIL STARTER INSTALLATION

Place the starter assembly onto the outboard.

Install the starter housing retaining screws, wash-

ers, and lock washers. Be sure to place washers

between the starter housing and the flywheel

cover. Apply Ultra Lock to threads and tighten the

three starter housing screws to a torque of 120 to

144 in. lbs. (14 to 16 N·m).

Install clamp for oiling system wiring harness.

1. Starter housing screws (3)

MANUAL STARTER