Tiller Handle Service - Long Handle; Tiller Handle Removal - Evinrude E-TEC E40DRLSCB Service Manual

MIDSECTION
TILLER HANDLE SERVICE – LONG HANDLE
TILLER HANDLE
SERVICE – Long Handle
Removal
WARNING
To avoid accidental starting of engine
while servicing, twist and remove all spark
plug leads.
Use Remover tool, P/N 342226, to unsnap the
throttle cable clip from the throttle lever.
.
1
1. Remover tool
Remove the throttle cable anchor screw and
washer. Remove retainer clip from shift cable.
Remove cable retainer. Cut the tie strap holding
the tiller handle electrical harness.
1
2
1. Throttle cable anchor
2. Shift cable retainer clip
3. Cable retainer
4. Tie strap
260
Remove the electrical cover.
1
1. Electrical cover
Disconnect the electrical harness coming from the
tiller handle.
005121
Rope Start models
1. Electrical harness connector
4
3
Tiller Electric models
1. Electrical harness connectors
006745
Remove shift and throttle cables and wire harness
from grommet in lower engine cover.
002509
1
002511
1
001999