Evinrude E-TEC E40DRLSCB Service Manual page 267

Install shift cable on shift pin with a new cotter pin.
1. Cotter pin
Install shift cable retainer on shift cable trunnion.
1. Shift cable retainer
Use a soft-faced mallet to install the inner handle.
TILLER HANDLE SERVICE – LONG HANDLE
Secure tab of the inner handle into the outer han-
dle. Tab must be flush with the back of the flange
1
and top of tab must be flush with top of flange.
1
006720
1. Back of flange
1
Apply Nut Lock on the screw threads, install the
washer and screw.
IMPORTANT:
clock-wise until threads of screw engage threads
of screw boss. Failure to follow this procedure will
damage the screw boss threads. Once threads
are engaged, tighten screw so that there is no
space between tab, washer and screw. Top of tab
MUST be flush with top of flange.
006721
006680
MIDSECTION
Turn self-tapping screw counter-
006682
006681
12
265