Evinrude E-TEC E40DRLSCB Service Manual page 251

Remove the two stern bracket flange screws and
separate the stern brackets from the swivel
bracket.
1. Flange screws
Place the tilt/run lever in the RUN position.
Loosen the bellcrank setscrew.
1. Bellcrank setscrew
Remove the tilt/run lever, port stop link, and bush-
ing from the swivel bracket.
1
2
1. Tilt/run lever
2. Port stop link
3. Bushing
STERN BRACKET –MANUAL TILT MODELS
Remove the starboard stop link retaining screw
and nut from the swivel bracket.
1
1
1. Starboard stop link screw
COA2992
Remove the cotter pins from both reverse lock
pins. Remove the reverse lock pins and springs.
1
1. Cotter pin
2. Reverse lock pin
COA2976
Remove the reverse lock assembly from the
swivel bracket.
3
002204
MIDSECTION
002205
1
2
COA2979
12
COA2980
249