Tiller Handle Disassembly - Evinrude E-TEC E40DRLSCB Service Manual

Remove locknuts from screws on top of steering
arm.
1. Screw
Remove the screws attaching tiller bracket to
steering arm. Remove tiller bracket and handle.
1. Screw
TILLER HANDLE SERVICE – LONG HANDLE
Disassembly
Loosen throttle friction control so there is no
1
restriction on grip.
IMPORTANT:
pletely. Nut is under spring tension.
006362
1. Throttle friction control
Remove seven screws and bottom cover of tiller
handle.
1
006361
1. Cover screw
Remove stop switch cover screws, unplug stop
switch electrical connector and remove stop
switch assembly.
MIDSECTION
Do not back screw out com-
1
006711
1
006566
12
006713
261