Evinrude E-TEC E40DRLSCB Service Manual page 264

MIDSECTION
TILLER HANDLE SERVICE – LONG HANDLE
Disconnect trim switch connector. Remove con-
nector from trim switch wires. Refer to CONNEC-
TOR SERVICING on p. 148.
Use Twist-Grip Remover, P/N 390767, to depress
the grip detents. Tighten screw and remove the
grip by pulling grip.
1. Twist-Grip Remover
2. Screw
Remove the helix halves, rollers, and guides.
1 2
1. Helix halves
2. Rollers
3. Guides
Pull the throttle pin out of the cable.
262
1
2
006710
3 2 1
COA2674
006712
Remove the throttle friction control.
1
1. Throttle friction control
Remove the throttle cable retaining clip. Pry the
cable trunnion out of the steering handle and
remove cable.
1. Retainer
2. Throttle cable trunnion
The trim switch wiring can now be removed from
the inner handle.
Remove the screw and washer retaining the inner
handle tab.
006671
1
2
006674
006681