Tiller Handle Disassembly - Evinrude E-TEC E40DRLSCB Service Manual

Disassembly
Loosen throttle friction control so there is no
restriction on grip.
IMPORTANT:
Do not back screw out com-
pletely. Nut is under spring tension.
1. Throttle friction control
Use Twist-Grip Remover, P/N 390767, to depress
the grip detents. Tighten screw and remove the
grip by pulling grip.
1
1. Twist-Grip Remover
2. Screw
Remove the helix halves, rollers, and guides.
1 2
1. Helix halves
2. Rollers
3. Guides
1
001259
2
002189
3 2 1
COA2674
TILLER HANDLE SERVICE – STANDARD
Pull the throttle pin out of the cable.
Remove stop switch cover screws and cover/stop
switch assembly.
Remove the throttle control plate.
1
1. Throttle control plate
MIDSECTION
24294
24288
12
24287
255