Evinrude E-TEC E40DRLSCB Service Manual page 259

Install the metal outer handle over the plastic inner
handle and drive the outer handle into place.
Secure tab of the inner handle into recess of the
outer handle with the steel pin.
Install the handle end of the throttle cable. Snap
the throttle cable trunnion into the recess in the
handle. Install the retainer clip.
1. Throttle cable trunnion
2. Retainer clip
TILLER HANDLE SERVICE – STANDARD
Install the throttle control plate on outer handle.
1
1. Throttle control plate
Push the throttle cable pin through the end of the
31202
throttle cable.
24285
Lubricate end of the pin, guides, rollers, helix
grooves, and inner handle guide slot with Moly
Lube. Place the guides over the roller pin and into
the slots of the inner handle. Place the rollers on
the ends of the roller pin. Assemble the helix
halves on the handle and slide the grip over the
helix.
1
2
24282
24286
MIDSECTION
24295
24294
12
24293
257