Tiller Handle Service - Standard; Tiller Handle Removal - Evinrude E-TEC E40DRLSCB Service Manual

MIDSECTION
TILLER HANDLE SERVICE – STANDARD
TILLER HANDLE
SERVICE – Standard
Removal
WARNING
To avoid accidental starting of engine
while servicing, twist and remove all spark
plug leads.
Remove the throttle cable anchor screw and
washer. Loosen throttle cable retainer screw. And,
remove the tie strap holding the tiller handle elec-
trical harness.
1
3
1. Cable anchor screw and washer
2. Cable retainer screw
3. Clip
4. Tie strap
Use Remover tool, P/N 342226, to unsnap the
throttle cable clip from the throttle lever.
1
1. Remover tool
254
Remove the electrical cover.
1
1. Electrical cover
Disconnect the electrical harness coming from the
tiller handle.
4
2
002207
1. Electrical harness connector
Remove throttle cable and wires from grommet in
lower engine cover.
Remove the screw attaching steering handle.
Remove handle.
005121
1. Screw
002509
1
002511
1
31194