Server Physical And Environmental Specifications - HPE Integrity rx2800 i2 series User's & Service Manual

Table 5: Additional component power consumption
Additional component
Processor
SAS disk drive (with I/O access)
SAS disk (idle)
PCIe card

Server physical and environmental specifications

Operating temperature and humidity ranges might vary, depending on the installed mass storage devices.
High humidity levels can cause improper disk operation. Low humidity levels can aggravate static
electricity issues and cause excessive wear of the disk surface.
NOTE:
De-rate maximum dry bulb temperature 1°/300 m (1000 ft) above 900 m (3000 ft).
Table 6: Environmental specifications (system processing unit with hard disk)
Parameter
Operating temperature (up to 1524 m/5000 ft)
Non-operating temperature
Over-temperature shutdown
Operating humidity
Non-operating humidity
Acoustic Noise Emission (ISO 9296)
Sound Power
Level
Sound Pressure Level
Altitude
Operating altitude
Non-operating altitude
22 Server physical and environmental specifications
Maximum configuration (disk
active)
Power consumption
130 W 443.6 Btu/h
23 W 78.4 Btu/h
16 W 54.5 Btu/h
10 to 25 W 34.12 Btu/h to 85.30 Btu/h
Value
Data Center Server
+5° C to +35° C (+41° F to +95° F)
- 40° C to +70° C (40° F to 158° F)
+38° C (+100° F)
15% to 80% RH noncondensing
8% to 90% RH at 65° C noncondensing
LwAd = 7.0 B
LpAm = 52.7 dB
0 to 3000 m (10,000 ft) maximum
0 to 4,600 m (15,000 ft) maximum
Office Friendly Server
LwAd = 6.0 B
LpAm = 42.4 dB