Troubleshooting The Ilo 3 Mp Subsystem - HPE Integrity rx2800 i2 series User's & Service Manual

Diagnostic Sample IPMI Events
LEDs
I/O Card Type E0h, 133d:26d
IO_LBA_CLEAR_ERR_FAILED
I/O Card Type E0h, 144d:26d
IO_SBA_CLEAR_ERR_FAILED
I/O Card Type E0h, 146d:26d
IO_SLOT_POWER_ON_ERROR
I/O Card Type E0h, 145d:26d
IO_SLOT_POWER_DEFAULT_ERROR
I/O Card Type E0h, 136d:26d
IO_LBA_RESET_ERROR
I/O Card Type E0h, 130d:26d
IO_DLL_ERROR
I/O Card Type E0h, 143d:26d
IO_ROPE_RESET_ERROR
I/O Card Type E0h, 7346d
CC_IODISC_LBA_LINK_TRAIN_ERR
I/O Card Type E0h, 7356d
IO_PCIE_LINK_SUBOPTIMAL

Troubleshooting the iLO 3 MP subsystem

Cause
This subsection provides information on troubleshooting issues with the iLO 3 MP subsystem.
iLO 3 MP LAN LED on the rear panel
The iLO 3 MP LAN supports two LEDs, viewable from the rear of the system:
• iLO 3 LAN link LED, which indicates link speed
• iLO 3 LAN activity, which indicates link activity
Cause Source Notes
I/O LBA clear error SFW
failed
I/O SBA clear error SFW
failed
PCI-X slot power on SFW
error
PCI-X slot has SFW
incorrect default
power state
I/O host bridge SFW
(Lower Bus Adapter)
is inaccessible
because rope reset
failed to complete
PCI clock DLL error SFW
I/O rope reset failed SFW
to complete
PCIe link failed to SFW
train
PCIe link is not SFW
running at max
capable bandwidth
Troubleshooting the iLO 3 MP subsystem 123