Removing The Server From The Rack - HPE Integrity rx2800 i2 series User's & Service Manual

Removing the server from the rack

To remove the server from a Hewlett Packard Enterprise, Compaq branded, Telco, or third-party rack:
Procedure
1. Power off the server (Powering off the server).
2. Extend the server from the rack (Extending the server from the rack).
3. Disconnect the cabling and remove the server from the rack. For more information, see the
documentation that ships with the rack mounting option.
4. Place the server on a sturdy, level surface.
Removing the server from the pedestal kit
Required tools
No tools are required for disassembling the pedestal kit.
Power off the server and remove cables
Procedure
1. Power off the server (Powering off the server).
2. Disconnect the power and LAN cables connected to the server.
Removing the pedestal kit
Procedure
1. Remove pedestal feet.
Removing the server from the rack 139