Installing A Half-Length Expansion Board - HPE Integrity rx2800 i2 series User's & Service Manual

Installing a half-length expansion board

Procedure
1. Remove the access panel. See Removing the access panel on page 60.
2. Remove the PCI riser cage. See Removing the PCI riser cage on page 60.
3. Remove the expansion slot cover. See Removing expansion slot covers on page 61.
4. Install the expansion board.
5. Connect any required internal cables to the expansion board.
6. Reinsert the PCI riser cage into the chassis.
7. Connect any required external cables to the expansion board.
Installing a full-length expansion board
Procedure
1. Remove the access panel. See Removing the access panel on page 60.
2. Remove the PCI riser cage. See Removing the PCI riser cage on page 60.
3. Remove the expansion slot cover. See Removing expansion slot covers on page 61.
4. Install the expansion board.
Installing a half-length expansion board 63