Utilities - HPE Integrity rx2800 i2 series User's & Service Manual

Utilities

SAS disk setup
Using the saupdate command
The saupdate command is used to query or change the mode of the Smart Array P410i and Smart Array
P411 controllers to HBA or RAID. Querying or changing modes is not supported for other controllers.
The newly added commands to SAUPDATE are:
• Get Mode
• Set Mode
Get mode
This command displays the current mode of the controllers.
Syntax
saupdate get_mode <controller>
<controller> can be any one of the following strings.
Table 46: <controller> strings
<controller>
<seg:bus:dev:func
>
all
<model>
Meaning
A controller having the PCI segment id, bus id, device id and function id is
addressed
Addresses all controllers in the system
Controllers of a particular type indicated by the <model> string are addressed
Utilities 181