Overview - HPE Integrity rx2800 i2 series User's & Service Manual

Overview

Table 1: Hardware specifications for the server
Component
Processors
Memory
Disk drives
PCI slots
SAS controller
LAN ports
Server
One or two Itanium dual-core or quad-core processors:
• 1.6-GHz Dual-core Processor 10-MB cache
• 1.46-GHz Quad-core Processor 16-MB cache
• 1.73-GHz Quad-core Processor 20-MB cache
Supports up to twenty-four Double Data Rate 3 (DDR3) DIMMs mounted on
expansion boards that attach to the system board.
Supported DIMM sizes are as follows:
• 2 GB
• 4 GB
• 8 GB
• 16 GB
Minimum memory configuration is 4 GB (2 x 2-GB DIMMs).
Maximum memory configuration is 384 GB (24 x 16 GB DIMMs).
NOTE:
For additional restrictions on memory configuration, see Installing DIMMS
Installing DIMMs on page 67.
One to eight hot-plug SAS hard drives
I/O riser options:
• One full height full length PCIe x8 and two low profile PCIe x4 slots
• One full height full length PCIe x8 and one low profile PCIe x8 slots
Eight port SAS controller or eight port SAS controller with internal RAID
Four GigE LAN ports
Table Continued
Overview 11